“American” – a quick way of decorative plastering

American" plastering is a widely used method renowned for its quickness and ease of use. It’s a technique that makes it easy to turn smooth walls into textured surfaces. This may be the method for you if you’re looking for a quick and easy way to add a distinctive and fashionable finish to your walls.

Using this technique, decorative plaster is applied in a way that gives the surface a textured, almost patterned appearance. The allure of "American" plastering is its adaptability; with the right tools and methods, you can create a wide range of effects. Regardless of your preference for a more pronounced design or a subtle texture, this method allows for flexibility and creativity.

American decorative plastering is a quick and easy method that gives your walls a stylish and textured look with little work. This technique is a great option for novices and experienced do-it-yourselfers who want to quickly and effectively improve the interior of their home because it enables you to create a distinctive, eye-catching finish that can transform any space.

Features and composition

If the plaster is chosen with consideration for the operating conditions, any kind is appropriate for finishing walls and facades using the "American" technique. Use gypsum cement indoors for facades; it can tolerate high humidity and temperature swings.

The application method, which involves pouring the solution into a texture gun (hopper bucket) and then spraying it under pressure through a nozzle onto the surface to be treated, produces the desired coating structure. The outcome in the end might differ.

The image below shows several finished decorative finishing examples.

To alter decorative plaster’s texture:

• change the pressure in the hopper bucket to increase or decrease the size of the splashes;
• apply the solution in rare drops or a thick layer, almost completely hiding the base;
• cover the wall with the composition in several layers (first with large splashes, then small ones);
• after partial drying of the plaster, carefully, without pressure, smooth the surface.

Benefits and drawbacks of the coating

"American" plaster is a finishing technique that is reasonably common because:

The relief structure causes the plaster to become dirty and discolored over time as dust builds up on it. But if needed, the facades’ moisture-resistant coating can be cleaned. It will also be feasible to maintain the walls clean if you give them a protective varnish.

Another drawback is that "American" plaster has less decorative qualities than other varieties, which makes it uncommon to use for residential interior decoration.

Application technology

In order to apply plaster on your own using this method, you’ll need:

If painting the coating is your intention, get paint, a tray, and a roller with a long pile ready.

Preparation

You must prepare the surfaces before applying the solution. Initially, the old coating is removed from the walls. Examine for signs of mold, clean the impacted areas, and apply antiseptic treatments. The cement mortar is used to fill in all of the big cracks and crevices.

They are then primed after this. Use a universal deep penetration primer on surfaces coated in base plaster. To increase adhesion, Beton-kontakt quartz primer is applied to smooth materials such as concrete, plasterboard, OSB-paneled walls, and others.

Preparation and application of plaster

In order to combine the solution, follow the ratios given in the directions. As the plaster is applied mechanically, make a big batch at once. Make enough of a portion to cover the entire wall. A heterogeneous structure will result from varying the consistency of the composition when it is mixed in sections.

After adding the solution to the hopper bucket, attach it to the compressor. Move on to the application.

Spray between 50 and 60 centimeters away. Adjust the compressor’s pressure to 2.5 atm. Make use of a 4 mm diameter nozzle.

Every inch of the wall is processed reliably. The video depicts how it occurs.

Plastering a surface that has already been primed and painted is an additional choice. Using this method, you can produce an amazing coating; white mortar splatters against a dark background will look particularly striking. After that, painting the surface won’t be possible, but you can still apply a glaze or clear protective wax if you’d like.

After two days, the plaster dries completely, and painting can begin.

American decorative plastering is a useful and effective way to add a distinctive texture and finish to your walls. It’s a technique that lets you achieve a stylish look without investing a lot of time or money because it combines speed and creativity.

The adaptability of this strategy is one of its main advantages. "American" plastering can be customized to your vision, whether you’re going for a soft texture or something more striking and distinctive. It’s a fantastic option for novices and seasoned do-it-yourselfers alike.

By using this technique, you can easily change any room in your house while giving the walls more personality and depth. Although the process may initially seem a little intimidating, with a little practice, you’ll discover that it’s a manageable and worthwhile endeavor.

Video on the topic

American.The final touch

Detailed application of decorative plaster from ORDINARY PUTTY. American. Apartment renovation.

And so it was possible? American IMMEDIATELY on drywall. Visual example. Decorative plaster.

Decorative plaster, in two colors. Travertine. With two hands #decor #withyourself #design #art

Decorative plaster world map is the most practical and the most inexpensive . Master class . Training