Bolars — facade plaster: application and characteristics

A common option for people wishing to improve the outside of their houses or buildings is bolar facade plaster. This plaster, which is well-known for its toughness and aesthetic appeal, provides any façade with style and protection.

Bolars plaster offers a dependable layer against weathering in addition to improving the appearance of your exterior. This plaster can be used for both new construction and renovation projects because it is made to accommodate a range of requirements and tastes.

This post will discuss the qualities of Bolars facade plaster, how to apply it, and why it might be a good option for your upcoming project.

Product characteristics.

The compositions are made using a gypsum or cement-sand base that has been modified and contains moisture-resistant materials to prevent the formation of microscopic cracks.

Ornamental cement Bolars is a material that produces a distinctive stone-like texture that is applied to houses for both "wet" thermal insulation and finishing layers.

Builder reviews indicate that Bolars facade plaster is ultimately less expensive than its equivalents.

• Economy – the consumption for thermal insulation and finishing per 1 m2 of wall is approximately 12 kg. At the same time, the use of other materials is not required.
• Minimum service life – 10 years.

Plasters for various types of work.

Interior decoration compositions possess a gypsum-sand foundation, excellent elasticity properties, and strong adhesion. They are utilized in low-humidity spaces.

Coatings are applied in a 2–30 mm layer. The end result is flawless coatings free of cracks, even minute ones:

• Elastic plasters, due to their structure, ease the load on the base. They make it possible to implement a surface with a reflective effect, finishing puttying is not required.
• Bolars thermal insulation compounds containing highly efficient polymers reduce the load on walls and ceilings, create high-quality sound insulation and insulation. The mixtures are designed to form several reflective surfaces.
• The "Gypsum-comfort" composition for decorating rooms with a dry microclimate is characterized by high performance. It has good adhesion properties on surfaces made of any materials.

Bolars facade decorative plaster is distinguished by its multipurpose application and enhanced resilience to moisture and temperature fluctuations.

Sand and cement are the raw materials used to make the compounds. Suitable for finishing and external insulation in both high- and normal-humidity environments. Thickness of layer: 2–20 mm. can be used mechanically or manually.

Mineral-S plaster.

Because of the mixture of various sand and marble chip fractions, these compositions allow for the formation of multiple textures. includes BARK, MALDIVAS, and ODYSSEUS coating types. This decorative composition made by Bolars can be used to stairwells, halls, hotels, offices, and public buildings because it is essentially unaffected by mechanical impacts. Because of the silicone base, the composition has a unique vapor permeability and resistance to salty sea moisture.

Mineral BARK plaster ("Bark beetle").

The composition of this acrylic mixture is marble particles, white cement, polymers that strengthen the structure. Used for the exquisite decoration of private houses, commercial, administrative buildings, entertainment venues. By its texture, Bolars decorative plaster "Bark beetle" imitates a surface damaged by a beetle, upon tactile contact it resembles tree bark. Coating thickness – 20-30 mm. The fraction of the filler can vary from 1.5 mm to a volume of 3.5 mm, designed to create fairly rough finishing textures. It is highly economical due to low shrinkage and low consumption. Bolars decorative universal plaster "Bark beetle" has excellent adhesion, elasticity, resistance to natural influences, ultraviolet radiation and pollution.

Mineral MALDIVAS plaster.

Because of its granular structure, the coating has a rough texture that is comparable to sea sand. Can be tinted in any shade, creating quite unique interior solutions when bright colors are used; perfect for nightclubs, upscale hotels, children’s facilities, and cottages.

The range of grain diameter is 1.5–2.5 mm. Application feature: The solution must be applied evenly across the wall to match the filler grain’s thickness.

Mineral ODYSSEUS plaster.

Structural rollers are used in the application process of these acrylic compositions to create a relief pattern in the coating. Bolars ODYSSEUS mixtures come in four textures and a broad range of colors.

CRYSTAL plaster.

Ready-to-use blend with real marble particles, which enhance the coating’s beauty and aid in shielding surfaces from damaging elements. Bolars Crystal decorative plaster has a high mechanical resistance, making it suitable for use in public and office settings. In addition, the material is resistant to chemicals, fumes, and corrosion. An increased resistance to frost is a distinguishing feature. Bolars Crystal is an all-purpose decorative facade plaster that works well on nearly any surface, including metal. There are two varieties that have a fraction of 1.5–2 mm.

VAVILON decorative putty.

The composition stands out for its intention to create extremely creative relief patterns. With stencils, intricate, unthinkable compositions can be made because of the solution’s low fluidity. It enables you to design surfaces in an amazing way even if you lack formal artistic training.

Features of using plasters.

The material comes in 25 kg packages as a dry mix. Before using, dilute the compositions with water in accordance with the attached instructions. Consequently, the mixture ought to resemble heated plasticine in consistency.

The compositions exhibit good adherence to surfaces composed of various materials and the capacity to reliably fill even the tiniest holes and cracks through simultaneous seepage.

The mixture’s modifying additive content causes all surface defects to level and prevents the compositions from deforming after hardening. Grinding and grouting are not necessary after finishing. Reviews show that Bolars’ facade plaster stands out when used for insulation because it doesn’t reduce the vapor permeability of brick walls and foam concrete. This means that forced ventilation is no longer necessary.

Preparatory work.

13 kg/sq.m is the average mixture consumption for a 1 cm layer. The dry mixture is prepared as directed by pouring it into a hopper using the mechanical application method.

When using the manual technique:

1. The dry mixture is diluted with water, which is gradually added while stirring with a drill with a special nozzle, in a proportion of 1 kg / 0.4 l;
2. Re-mixing must be done after 5-10 minutes;
3. The solution is suitable for use for 3-4 hours.

Prior to using Bolars Facade Plaster, you must:

1. Check the reliability of the base;
2. Perform all provided engineering measures;
3. Clean the base from dirt;
4. Prime the surface with a composition corresponding to the water absorption of the structure, let it dry completely.

Bolars facade plaster is a multipurpose material made for external walls that improves a building’s appearance and provides superior weather resistance. It is a well-liked option for both residential and commercial projects because of its reputation for longevity, simplicity of application, and capacity to produce a wide range of textures and finishes. A durable and aesthetically pleasing outcome is guaranteed with an understanding of its properties and the use of appropriate application techniques.

Technology of plastering facades.

When it’s dry outside, work is done between +5 and +30 degrees Celsius. Bolars façade heat-insulating plaster cannot be used in the event of severe weather or wind:

• Work is done manually using a trowel, trowel or spatula;
• The mechanized method requires the use of a plastering station;
• A layer thickness of 20 mm is enough to waterproof the structure and partially insulate it;
• To improve the adhesion of the mortar to the masonry, facade fiberglass mesh is used;
• After the solution begins to harden, the unevenness is removed with a spatula;
• If it is necessary to perform several layers, the previous one is leveled with a special comb and then left until completely hardened;
• A primer similar to the brand of plaster is applied;
• Drying time – 24 hours;
• The use of heat guns is not allowed – this can cause chips and cracks;
• Sanding is allowed only after the surface has completely dried;
• Acrylic paint is applied over the plaster – it does not reduce the vapor permeability of the coating.

The thermal insulation qualities of 60 mm Bolars plaster are comparable to those of "wet facade" insulation systems, which contain 50% polystyrene foam.

Bolars "Crystal" and its other varieties of decorative facade plaster don’t need any extra materials.

Safety measures when operating:

• It is necessary to wear hand and eye protection so that Bolars plaster does not get into them;
• If the solution gets on the cornea, the eyes must be immediately rinsed with plenty of water and seek medical help;
• Materials must be inaccessible to children.

Bolars facade plaster combines strength and visual appeal to provide an enduring exterior wall finishing solution. Because of its simple application process, both professionals and do-it-yourselfers can use it.

Your walls will be protected and will look good for a long time because plaster is resistant to weather. Bolars is a trustworthy option whether you’re looking to finish a new building or update an outdated facade.

Bolars facade plaster offers a variety of textures and colors that let you express your creative side while still giving your walls the essential defense. It’s a useful and

Video on the topic

Application of Crystal BOLARS plaster

Marble plaster with Bolars Decorative W

The best of the cheap. Plaster for the bathroom . Choosing Leroy plaster reinforced Bolars or Poligran?