Decorative plaster Rain: DIY application methods

The "Rain" effect decorative plaster is a chic and adaptable option for giving your walls depth and texture. This special finish gives the impression of gentle raindrops tumbling down the surface, bringing a sense of elegance and tranquility to any space. Depending on how it is applied, the effect can be more or less noticeable, making it a versatile choice for a range of interior design styles.

Applying decorative plaster can seem difficult at first, but with the right advice, anyone with a little perseverance and some simple tools can handle the project. Using the proper technique will help you achieve the desired effect, whether you’re going for a light drizzle or a heavy downpour. This post will guide you through the entire process of applying a plaster finish to create your own "Rain" effect, from priming your walls to applying the finish with ease.

You can turn your walls into a work of art that not only improves the aesthetics of your room but also gives you a surface that is strong and long-lasting with a few simple tips and tricks. So let’s begin your do-it-yourself project to make stunning, visually striking walls that are inspired by rain.

Types of Rain structure

The peculiarities of applying the material to the surface gave rise to the name of the coating option that was presented. Although there are many different application technologies available, in the end a pattern that resembles raindrops falling is formed. Several of the most well-liked methods for putting the information to use are available:

• Rain at an angle is a classic structure with a change in the angle of inclination.
• Formation of a “Rock” type structure to create a natural pattern on the wall.
• Use of textured mixtures to form a decorative coating resembling raindrops on the wall.

Preparatory stage

The preparatory phase is where all construction and repair work starts. This phase is as follows:

• It is necessary to prepare a spatula, roller, a set of trowels and rules, as well as other tools for performing the work. In addition, you should prepare a work area, personal protective equipment, a ladder or stepladder when performing work on the upper part of the walls.
• The old coating remaining on the walls must be completely removed, since the plaster must be applied to a clean and smooth surface.
• You should select and purchase a mixture in advance to prepare the solution that will be applied to the wall.

Although it’s fairly easy to create a rain effect on the wall, you should take some time to prepare.

Priming the wall

Primer treatment of the walls is worthwhile after all previous coatings have been removed from the surface. It is necessary to apply a primer because it strengthens the subsequent coating and helps the material adhere better to the surface. The entire surface of the wall is covered with an even layer of primer. After that, you just need to wait for the coating to completely dry, which will take some time depending on the material you chose. In addition, if the work is being done in a room with a lot of humidity, you can apply an antiseptic to the walls.

Alignment and grinding of the surface

Examining the walls for chips, cracks, and other significant flaws is the next step. In order to apply the decorative material properly, any wall defects must be fixed. You can use a grinding disc or sandpaper for this. It is worthwhile to meticulously even out all of the surface irregularities on the wall.

Following this, you can apply another layer of plaster after cleaning away any remaining dust and remnants of the previous coating. Since the top layer will serve as the foundation for the subsequent decorative material, it should be even and smooth.

For improved adherence to the solution, the dried plaster layer can have a primer reapplied to it.

Ornamental cement Rain adds a dynamic and sophisticated touch to any interior space with its distinctive textured finish, which emulates the patterns of natural rainfall. This tutorial will lead you through the entire do-it-yourself application process, from priming your walls to using basic tools and methods to create the ideal rain effect. This method is easy to use and rewarding, even for inexperienced do-it-yourself enthusiasts. It will allow you to add a stunning decorative finish to your walls.

Technology of application and creation of rain texture

There are a lot of ways to make rain appear on the wall, but it is beneficial to learn about the most widely used ones in order to complete the task. The outcome will vary based on the kind of work that is chosen. It is important to weigh the features of different technologies for applying the material in order to select the best one.

Rain at an angle is difficult but beautiful

Beginning artists should avoid using the angled rain pattern creation technique as it calls for a certain level of expertise from the master. There is more to the plaster coating than just the 45-degree angle at which it is applied to the wall.

1. The application process is practically no different from the standard procedure, but in this case it will be necessary to apply the material at an angle to the surface of the earth.
2. To make the task easier, you can use a regular pencil. Using a pencil, you should draw parallel lines along the entire wall.
3. Along the marked lines, you should evenly distribute the material over the area of ​​​​the coating.
4. After this, grouting should also be done along the designated lines. The angle of inclination should be observed throughout the work, otherwise the rain pattern will not work.

The facade rain will appear stunning on the wall surface if all the procedures are meticulously carried out as directed. Additionally, interior room wall decoration is possible with this technology.

Creating rain with textured plaster

There is a method for using textured mixtures to create a rain pattern. The following actions must be taken when selecting this option:

• Ideally smooth the walls by applying plaster to the base. The final result and the overall appearance of the pattern will depend on this.
• At the second stage, a base layer is applied, which is fundamental in creating the effect of rain on the wall.
• A second layer of solution is applied over the dried material. It is better to do this with a brush, all strokes are applied along a vertical line in a thin layer. At this stage, a mixture several shades lighter is used.
• In the final stage, a texture is created using a plastic float. The material must be distributed over the entire surface, for this, it is necessary to perform grouting in the vertical direction.

Applying a rock-type coating

A "Rock"-style coating is an intriguing wall decoration idea. Here is a presentation of the work’s stages:

1. A small amount of the mixture must be applied to the prepared surface, it is enough to select an area of ​​1 square meter.
2. A structural pattern must be applied to this area using a trowel. To do this, the trowel is applied to the surface at an angle of 10-20 degrees, and then the mixture is smoothed out in a chaotic manner.
3. You can smooth out the mixture in a chaotic manner, or you can use the herringbone or ladder technique, depending on your individual preferences.
4. When one area is completed, you should proceed to the next square. When applying the mixture, you should slightly go over the previous area so that there are no rough joints on the wall.

One feels at one with nature because of the rock pattern. A home with this kind of design choice takes on an attractive and alluring appearance.

Plaster finishing

Finishing is frequently used to enhance the decorative coating’s qualities. This can be accomplished by covering the wall with a finishing material once the plaster layer has dried. Finishing allows builders to alter the walls’ color scheme and give them resilience against external influences.

The finishing coat will be particularly important for walls in spaces with a lot of sunlight or humidity.

Painting the coating

Painting over ornamental plaster is one finishing method. The work plan is divided into multiple phases:

1. Initially, you should wait until the wall is completely dry, this takes about a day. However, the complete drying time of the mixture may vary significantly depending on the selected material.
2. After this, it is necessary to cover the dried wall with an even layer of paint. It is best to distribute the paint with a roller, this will create an even layer.
3. When the first layer of paint dries, the procedure is repeated. Using a roller, a second layer of paint of the same shade that was used the first time is applied. This will give the wall a rich color that will not fade.

By using this process, you can alter the wall’s color and use it to create a distinctive design for the building’s exterior as well as interior.

Other finishing coatings

You can get the desired effect from the decorative coating by choosing different finishing options. Furthermore, a variety of finishing techniques are employed to fortify the material and produce a coating that deters water from the surface. Of the various and most widely used techniques for final finishing, the following ought to be emphasized:

1. Using a varnish coating to give the wall a shine and increase its strength. Varnish reduces the negative impact of sunlight, which prevents paint from fading. In addition, walls with a varnish coating are much easier to wash, just wipe with a damp cloth to remove dirt and dust.
2. Another option for finishing at the final stage of work is the use of wax compounds. The finished solution is applied to the wall over a dried layer of decorative plaster. Wax gives the coating an unusual shine, and also increases the wear resistance of the material.

Ornamental cement Rain is a flexible way to give your walls character and texture. With the correct tools and a little perseverance, you can accomplish an expert-looking finish on your own. This plaster gives you a lot of creative options for creating textures that are more pronounced or subtle.

DIY rain plaster application can be a rewarding endeavor. You can customize your area with it, and most do-it-yourselfers find the process to be fairly simple. Paying close attention to detail will guarantee the best results, from selecting the ideal base coat to perfecting the finishing touches.

Rain plaster has a unique look that can transform any room if you follow the instructions carefully and take your time. It’s a great way to give your walls a new look and a unique finish that expresses your own style. You’ll discover that it’s a fulfilling way to improve the interior of your house with practice.

Video on the topic

SAND RAIN. Application of decorative coating Parade@Milano Virason. Master class No. 33

Bark beetle!!! Decorative plaster. Rain how to quickly apply!!! from A to Z 😊👍👍

I teach the customer"s workers how to correctly apply decorative plaster of the Bark beetle texture, Rain grout

Decorative plaster from tile adhesive, do it yourself, for pennies.

The process of applying the "Bark beetle" plaster pattern