Decorative velvet plaster: application methods

Decorative velvet plaster is a special way to give your walls a plush, opulent finish that can give any space depth and character. This kind of plaster is renowned for its opulent, velvety look, which has the ability to elevate simple spaces into elegant settings.

For velvet plaster to have its distinctive appearance, a particular application method is needed. The wall surface must first be prepared, a base coat must be applied, and the velvet plaster must then be carefully and meticulously layered. Completion of these steps with ease guarantees a uniform and seamless end.

Whether you want to make a big statement or a subtle elegance, knowing how to apply decorative velvet plaster will help you get the look you want. You will learn all the necessary methods and pointers for a faultless application from this guide.

How to achieve a velvet effect

Surfaces that mimic plush fabric are decorated with decorative velvet plaster. The following are the finishing material’s principal benefits:

• Practicality;
• rich shade range;
• long service life;
• aesthetic appearance.

It’s crucial to follow the application instructions precisely when using decorative velvet-like plaster on a surface. It takes a little more work to achieve a velvet effect than it does with plastering.

Only certain thin-layer decorative plasters or paints can produce a velvet coating.

The key is applying the recommended three to four layers. Applying layers is done with a specialized round trowel.

The work completed allows for the creation of a lovely matte coating with gentle tints that resembles velvet draperies.

Such finishing will look great in the interiors of shabby chic or baroquely decorated rooms. Velvet curtains will add a polished appearance to the space.

Types of material (manufacturers)

The impact of velvet fabric is not the only option for finishing material. The way mixtures from various manufacturers appear on the wall will vary. As an illustration:

[ads_color_box color_text=#444; color_background=»#dbebff»]

• VGT «Velvet» or «Wet silk».
• Decorazza Velluto is a decorative plaster with a velvet effect, looks like stretched fabric on the walls.
• Decorazza Velours is a more textured velvety covering reminiscent of velour fabric.
• Terraco Velvetex – decorative plaster with a pearlescent shine.[/ads_color_box]

The kind of finish further divides the materials:

• with a matte finish;
• with a glossy finish.

What is velvet effect paint

Contemporary decorative velvet paint is a water emulsion with finely divided particles.A delicate and soft coating is created when painting surfaces.

Paint is a thinner coating than plaster, which is the difference between the two. The effect can be given more texture by using velvet plaster.

The material used for paint and varnish has several advantageous qualities.

• Increased resistance to fading;
• the ability to use in rooms with high humidity;
• no pungent odor;
• environmental friendliness and safety;
• high covering properties.

Choice of color or tinting

Rich interiors are decorated with plaster in dark colors. The interior is made to feel light by the use of light shades.

The pre-made mixtures are offered for sale in buckets. Using a specialized computer program, they are tinted to the desired shade right in front of you in the store.

Color choices are made with the room’s future design in mind:

• High-tech – metallic gray, snow-white, charcoal;
• Provence – creamy, caramel, blue;
• loft – turquoise, emerald, light green, red shades;
• Baroque – soft pastel colors;
• eco-style – sand, brown colors;
• modern – lilac, blue, green;
• classic style – white and its shades, brown tones.

The purpose of the room determines the color scheme of the plaster:

1. Warm shades are used for finishing apartments based on the design option: rich or pastel shades. Accent additions of rich-toned plaster are acceptable (orange, lingonberry).
2. A light mixture can act as a base coat and be combined with black, purple inserts.
3. To renovate walls in an office, designers recommend using calm colors: white, caramel, smoky gray, blue.
4. Terracotta shades are suitable for zoning the space in the living room.
5. Neutral gray looks harmonious in a spacious bedroom.
6. Children"s rooms are decorated with bright-colored plaster. The best option is to apply a neutral base coat and accent details.

Note: purchasing velvet plaster does not ensure the intended outcome. The effect itself is produced by employing a unique application method.

Decorative velvet plaster gives walls a distinctive, opulent finish that elevates any area with its delicate, refined texture. This article examines several velvet plaster application techniques, including surface preparation, plaster mixing, application techniques, and finishing touches. Whether you’re a professional or a do-it-yourself enthusiast, knowing these techniques will help you produce an amazing, high-quality outcome.

Necessary tools

You should get the following ready before completing the work:

• Velor roller;
• medium-sized spatula;
• plastering trowel;
• container for the mixture;
• fly brush;
• thin brush.

How to apply decorative Velvet plaster

Plastering is always done on a surface that has been prepared.

1. Remove peeling paint, clean the surfaces from dust.
2. Areas where there are irregularities are leveled and sanded.
3. For better adhesion, it is recommended to paint the prepared base with an acrylic primer, preventing the formation of drips. This can negatively affect the quality of the coating.

The walls need to be smooth as silk. Even minor flaws will be emphasized by the plaster rather than hidden.

Decorative putty can be applied once surface preparation is complete.

Classic velvet technique

Shake the bottle well before using, then crack it open and blend until smooth.

It is advisable to begin work in the corners and in the vicinity of window and door openings. Use a narrow brush for superior processing of areas that are difficult to reach.

1. The first layer is putty, tinted in the color of decorative plaster. It acts as a background color – a substrate. Use a velor roller for this.
2. The walls covered with putty dry within 24 hours. Only after this can you proceed to the next layer.
3. The second layer is the velvet plaster itself. The composition is placed on the working part of the plastering trowel, applied to the wall and leveled with multidirectional short movements.

Two to three layers of decorative velvet plaster are applied.

Apply a thicker layer of the mixture to the surface and allow it to slightly dry to enhance the velvet effect. After that, a velvet effect is produced by lightly pressing the layer level.

The video illustrates this most basic technique:

Antique silk technique

The key to the application method is to "comb" the plaster layer in various directions during the final stage of smoothing. For the job, textured plaster with the VGT marking—a material that is coarsely distributed and extremely viscous—is appropriate.

• primer – it is advisable to apply two layers, then dry for 4 hours;
• first layer – applying the base in color using a velor roller. Next, the layer must be dried for about 3 hours;
• second layer – applying decorative plaster with a wide sweeping brush. The strokes should be short and chaotic. We cover an area of ​​about 1 sq. m.m.
• after 5-6 minutes, when the plaster has slightly set, take a regular synthetic sponge. With its help, as it were, smooth out the borders of the strokes. Almost without pressing, move the plaster with a sponge, forming our pattern.
• after another 5-6 minutes, do the same with a sponge. The sponge needs to be rinsed periodically.
• and after another 5-6 minutes, the last 3rd time, do the same.
• we proceed to the next fragment of the wall and repeat the algorithm.

Two-color velvet

It looks good to use decorative plaster that mimics a rich color scheme and velvety texture. However, adding mother-of-pearl to its mix increases the number of ways you can finish it. There are more vivid and shimmering hues available.

1. Make sure that the base is completely dry and the shade matches the selected tone of the main coating. Decorative plaster is applied to the wall with a plastic trowel.
2. Form a homogeneous layer with multidirectional movements, avoiding accumulations and omissions of the mixture used. The result should be a smooth surface with trowel marks in the form of two-colored areas.
3. After 2 hours, apply another layer of paint with a velvety effect and create the desired pattern with arbitrary movements of the tool.

The updated surface shouldn’t have any creases or drips.

Texture using a sponge

You can use a natural sponge to give the plaster an unique visual effect. When using it, the images’ texture is random. The inner part of the product can be cut and applied to create a non-standard pattern. This technique aids in producing complex images on the plaster’s surface.

Tambooning is executed with delicate motions. The sponge’s veins come in a variety of sizes and shapes.

Applying multiple multicolored layers is advised to achieve a polychromatic effect. The surface takes on a light, speckled pattern when a natural sponge is used.

A synthetic sponge can also be used, but the pattern will be more detailed. The artificial sponge’s round form and fine porosity are the cause.

Tips from the masters

When using velvet-effect plaster on walls and ceilings, experts advise following these guidelines:

• Paints and varnishes must be of high quality;
• It is important to use special materials and tools to create unique textures;
• Before starting work, you need to read the instructions on the can;
• Each applied layer must be dried, so the work can take several days;
• Textured patterns on plaster are made with a notched trowel, brush, roller with a pattern. The pattern can be corrected in the first two hours after applying the layer;
• When choosing the desired shade, it must be taken into account that when it dries, it will lighten by one tone.

When estimating the material consumption, experts advise purchasing them with caution.

Application Method	Description
Hand Application	Using a trowel or sponge, apply the plaster directly onto the wall. This method allows for a more textured and personalized finish.
Spraying	Apply the plaster with a spray gun for a smoother and more even coat. This method is quicker and can cover large areas efficiently.
Roller Application	Use a roller to apply the plaster. This technique offers a uniform finish and is suitable for both small and large surfaces.
Brush Application	Apply the plaster with a brush to achieve a unique pattern or texture. This method is ideal for adding artistic touches.

Decorative velvet plaster adds a luxurious and distinctive finish that can completely change your walls. With the variety of textures and colors this technique offers, you can tailor the appearance of your space to your personal preferences.

The application techniques—whether you use a brush for a bolder look or a sponge for a more subdued texture—are meant to improve the walls’ visual appeal. A smooth and even finish that accentuates the beauty of the velvet plaster can only be achieved with careful surface preparation and technique.

Decorative velvet plaster, in general, lends an exquisite touch to any space by offering a soft, tactile quality in addition to aesthetic appeal. You can achieve a gorgeous wall finish that stands out and improves your interior design by selecting the appropriate application technique and paying close attention to detail.

Video on the topic

Velvet walls made of decorative plaster Imagine Velvet / "8-ka" technique

DECORATIVE PLASTER VGT VELVET / TWO-COLOR APPLICATION MASTER CLASS

Decorative plaster in the suede. Application technique

The strongest 👌 | Decorative plaster | Velura effect

Decorative plaster Aura Veluor Silver