"Bark beetle" facade plaster is a popular choice for exterior finishes because it gives buildings a unique, textured appearance. This kind of plaster is prized for its weather resistance and durability in addition to its aesthetic appeal. Bark beetle plaster can create a stunning and durable facade for any type of building, whether you’re finishing a new build or remodeling an existing one.
To get the desired effects, it is essential to comprehend how bark beetle plaster is applied and consumed. The surface area, application thickness, and particular product utilized can all affect how much material you’ll need. Plaster can be applied accurately and with precision to ensure a smooth, even finish that improves the look of your building.
Bark beetle plaster application calls for precise planning and application methods. Every stage counts toward the final result, from choosing the right tools to becoming proficient with the application technique. You can build a gorgeous facade that not only looks amazing but also withstands the weather for many years to come with the correct method.
| Aspect | Details |
| Type of Plaster | Bark beetle facade plaster |
| Application Method | Applied with a trowel and finished with a plastic float |
| Consumption | 2.5 to 3.5 kg per square meter |
| Grain Size | 1.5 mm to 3.0 mm |
| Drying Time | 24 to 48 hours |
| Base Material | Concrete, cement, or lime-cement surfaces |
- Long lasting results.
- Grain in facade finishing.
- Types of material.
- By composition, bark beetle facade plaster is divided into four types:
- Outside and inside.
- Flight of fantasy.
- Material basis.
- Economical consumption.
- Nuances of technology.
- Finishing layer.
- A pleasant neighborhood.
- Do it yourself.
- For creativity you will need simple tools:
- Video on the topic
- Application of decorative plaster Bark beetle
- bark beetle material consumption 6VID 20240614 084534
- "BARK BEETLE" without reinforcement and preparation.
Long lasting results.
Russia imported this kind of ornamental plaster from the West. And because of its robustness and unique appearance, it became popular. In our nation today, a lot of buildings—private, multi-apartment, and public—have this type of coating on their facades.
Its unique qualities account for its widespread use as a facade finish. Cerisit (bark beetle) plaster is relatively cheap and readily withstands mechanical loads; it is difficult to damage it by hitting it with an object. Water cannot pass through it or be absorbed by it.
It also permits the walls to "breathe" since it is vapor-permeable. Furthermore, bark beetle facade plaster acts as a great heat insulator due to its extremely low thermal conductivity. Facade plaster made of bark beetles does not burn or fear fire. Furthermore, it won’t release any substances that are hazardous to human health when heated to high temperatures.
The bark beetle also has the benefit of being environmentally friendly due to its preparation from inert ingredients. This makes it suitable for a range of settings.
Bark beetle exterior plaster also has a very long lifespan. For it, atmospheric precipitation is not frightening. On a coating like this, mold cannot survive. Additionally, you can lose a lot of weight by replacing the quartz filler with mineral astringent components. and so lessen the strain on the building’s supporting components.
Grain in facade finishing.
The wall’s bark beetle plaster gives the impression that industrious wood-boring beetles have passed by. A peculiar shape’s "paths" produce a pattern that resembles the one that covers old trees’ cuts.
The appearance of a beetle-eaten wood facade is created by utilizing tiny stones such as marble chips, minerals, acrylic dispersions, and titanium dioxide. The "crumbs" range in size from one-tenth to three-and-a-half millimeters. and is the primary determinant in giving the completed surface its specific texture.
Professional jargon refers to this component as "graininess." and has a direct impact on the depth and width of the coating’s grooves. And this establishes the overall appearance of the final "product." Interior rooms are typically decorated with plaster that has small grains in it. However, options with more grain look fantastic on facades. Other characteristics set different types of bark beetle plaster apart from one another.
Types of material.
By composition, bark beetle facade plaster is divided into four types:
- acrylic – produced in the form of a suspension using acrylic polymer; such plaster has good adhesion, so it feels great in a humid environment, due to which it is widely used where there is a lot of water, for example, in swimming pools;
- silicate: its main component is potassium silicate (another name is liquid glass); has high vapor permeability, since it includes water-repellent additives; has a large palette of colors;
- silicone: due to its properties, bark beetle silicone plaster is not subject to cracking, very well resists moisture, is more durable compared to other types; the most expensive of them;
- cement-lime: quartz chips are added to it, it tolerates low temperatures well.
Outside and inside.
There are three primary varieties of bark beetle wall plaster available on the market today. Bark beetle plaster variations for both indoor and outdoor decoration:
- for interior spaces;
- for use on building facades;
- for use both inside and outside – this is a universal material.
Bark beetle facade plaster is offered ready-made, pre-colored in the form of a solution. Grab it and get started. Naturally, this is very practical. But the cost of this plaster is high. Certain dry mixes are offered for sale in bags. Plast made by dry bark beetles is white. Nonetheless, bark beetle plaster comes in a variety of colors. A colourant can be used to achieve the required shade.
The structure is fairly dense, so manually mixing paint will be challenging. To do this, specialized machinery is used. A unique computer program chooses a suitable color. It won’t be hard to appropriately dilute the consistency if you take the appropriate steps. Additionally, it will cost a lot less than if a ready-made suspension is used. Bark beetle plaster "Starateli," bark beetle plaster "Bergauf," bark beetle plaster "Diamant," and other varieties are available today.
Flight of fantasy.
One intriguing feature of bark beetle facade plaster is that it can be used as an interior decoration material. Every time a coating is produced using such a solution, it is unique.
A genuine opportunity for creativity.Patterns can be compared to circles, tree bark, cascading water droplets, and more.
A trowel, which can be made of plastic or steel, is a specialized tool used to create this or that effect. Its tooth structure and arrangement produce a range of figures on the plaster layer. Additionally, the bark beetle facade plaster comes in a variety of colors, which increases the design options.
Material basis.
It can be used on various types of surfaces. Its indisputable advantage over certain alternative facade or interior decoration options is also this. Bark beetle plaster "feels" comfortable on brick, polystyrene boards, concrete, and plasterboard. It is applicable to sandwich panel finishing.
However, it is best to avoid using it on wood, smooth glass, metal, and plastic. It is not going to hold. It is important to first cover the base with a base—plaster made with cement or gypsum—so that it will lie flat and hold for as long as possible.
This is the final phase, that much is true. Consequently, it is not worth using it to fill in various cracks and depressions; better materials are needed for this.
Economical consumption.
Three millimeters is the ideal layer thickness. When working with dry bark beetle plaster, 2.5 to 3 kg will typically be consumed per square meter. The instructions on the package can be followed to calculate more precise numbers and the cost per square meter. Each type of bark beetle plaster has specific requirements. The amount consumed is determined by the grain’s size, or crumbs. Hence, more material will be needed with a grain size of 3.5 millimeters. if the crumb is no larger than 2.5 millimeters.
Experts suggest increasing the final figure by an additional five to ten percent per m² as a reserve. Bark beetle plaster will enable you to finish the task quickly if its consumption is accurately calculated. A twenty-five-kilogram bag of dry mixture will cost between six hundred and three thousand three hundred rubles. It costs between 500 and 800 rubles per square meter to apply.
The product is available for purchase in-store or by placing an order for delivery. Therefore, bark beetle plaster, which has a variable consumption per square meter, will be a great option for both interior and exterior building decoration.
The "bark beetle" facade plaster provides an eye-catching and long-lasting finish for external walls, thanks to its unique textured look. This plaster offers superior protection from weather conditions in addition to improving a building’s visual appeal. It is crucial to measure and prepare thoroughly before beginning the project because the consumption rate is dependent on the thickness of the application and the state of the surface. Applying the material correctly guarantees a consistent texture that makes the "bark beetle" effect pop and give your facade a distinctive, long-lasting finish.
Nuances of technology.
The use of bark beetle presents no special challenges. The packaging includes comprehensive usage instructions. It is also worthwhile to take into account a few points. Take the temperature regime, for instance. When the outside air temperature is between five and thirty degrees Celsius, bark beetle plaster is applied.
However, the humidity shouldn’t go above 80% at that point. Plastering is best done in the autumn or spring in this regard.
Another crucial thing to remember is that the composition needs to be used completely right away after being diluted. Otherwise, if you proceed slowly, the solution will solidify; its capacity to solidify rapidly sets it apart.
It’s also crucial to use water with the same qualities when diluting the mixture to cover a single surface. Additionally, the color needs to come from the same batch. The textured bark beetle plaster will then have the ideal appearance.
Finishing layer.
The final layer can be painted. You can use silicone or silicate paint. It is advised by experts not to paint right away after plastering. Three days should elapse at least. It says in the instructions that the bark beetle takes twenty-eight days to dry completely. Paint for bark beetle plaster is applied using a spray gun, brush, or fur roller. Applying bark beetle plaster strengthens the surface and gives the impression that it was formed recently.
A pleasant neighborhood.
Bark beetle plaster with texture complements other materials well. Plaster combined with vinyl wallpaper, ceramic tiles, and artificial stone can create a harmonious combination. All you have to do is choose the appearance of the "picture" you want to obtain. Find the proportion of its components that are made of various materials. After reviewing the expert advice, this can be completed on your own. Alternately, get in touch with skilled designers.
Do it yourself.
Is it feasible for you to complete the task using a bark beetle on your own? Of course! You can succeed with a little work, close attention to the directions, the right amount of bark beetle plaster used per square meter, and some repair work experience.
For creativity you will need simple tools:
- spatulas of different sizes and shapes;
- dilution container;
- plastic grater;
- drill with mixer attachment.
Prepare the surface that will be finished first. It has to be cleaned of all dirt, oil stains, grease, and dust. Putty is then used to fill in all the irregularities. It may leave behind bulges or depressions as long as they don’t exceed the size of the grains. A level playing field should exist for future work.
Primer paint, a unique primer, is applied to the putty after it has dried. It is crucial that the shade blend in with the plaster’s overall tone. Then, the possibility of soil showing through the coating layer will be eliminated. Moreover, some experts claim that a primer is not required when finishing the facade. You can begin applying after the primer has dried completely, which usually takes four to six hours.
Using a steel spatula to apply it is preferable. If the surrounding walls aren’t finished yet, they should also be covered; use protective film to cover the entire surface or apply masking tape to the corners.
Applying it evenly across the surface to create a uniform layer is crucial. It is essentially the same technology as ordinary puttying. You have to keep "rubbing" it until you can see grooves.
A pattern then develops as a result. To do this, a plastic float is used. It is recommended by experts to hold it sixty degrees away from the wall. Until the particles stop adhering to the float, you must "rub." It doesn’t take much work on your part. Use a float to cover the entire layer first, and then, once the plaster has slightly dried, once more. Ensuring the uniformity of the pattern is crucial.
A popular option for both professionals and do-it-yourselfers, facade plaster "Bark Beetle" has a unique textured finish and is long-lasting. It is perfect for exterior walls because, when applied properly, it provides both visual appeal and weather resistance.
It is essential to comprehend the rate of consumption when organizing your project. The thickness of the plaster layer and the granule size will typically determine how much you need. By following the manufacturer’s instructions, you can make sure you buy the appropriate quantity and prevent waste.
Plastering a "Bark Beetle" takes some skill, but it can be done successfully with the right tools and patience. An even and polished surface can be achieved by carefully preparing the surface and following a methodical process.
All things considered, "Bark Beetle" plaster is a dependable and lovely choice for external wall finishes. It can improve the appearance and durability of your facade with cautious application and appropriate preparation.
