How to properly glue liquid wallpaper: gluing features

A decorative and adaptable wall covering, liquid wallpaper has a distinct texture and is simple to apply. It is applied more like plaster than traditional wallpaper, giving your walls a smooth, customized look. Liquid wallpaper offers a unique and useful solution, whether you’re looking to update a room or completely transform a space.

Although applying liquid wallpaper might seem difficult at first, anyone can complete the task with the correct strategy. The procedure is simple, and you can get results that look professional with a little perseverance. We’ll walk you through all the necessary procedures and advice in this guide to make sure your liquid wallpaper sticks to your walls flawlessly and leaves a stunning, long-lasting finish.

Gluing features

The first step in DIY glue application is accurately prepping the wall surface.

In order to improve the coating’s fixation, the wall must be thoroughly cleaned of any leftover putty and primed with a roller or brush.

To create a protective layer, metal objects within walls need to be painted waterproof.

What materials can be glued

Liquid wallpaper can be applied at home to the following surfaces with proper pre-treatment of the wall surface:

• plaster;
• plasterboard;
• wood or metal (first you need to cover it with a layer of enamel or alkyd paint).

What tools are used in the work

To apply liquid wallpaper correctly, you’ll need the following tools:

• trowel . It is desirable that the tool has a transparent surface. Using it, you can always step by step control all the nuances of the work process;
• spatulas: corner, wide, narrow;
• paint roller. You can use foam or fur, but its coating must be dense and hard to ensure proper gluing of the wallpaper on the walls;
• basin or bucket for diluting the mixture;
• sprayer;
• portable lighting devices will help to control the quality of the application of the composition, promptly track and correct possible defects.

Step-by-step instructions for beginners

Once the wall surface has been prepared, dilute the mixture in a bucket or construction basin, stir well to get a uniform consistency, and then let it sit for about eight hours. Following these setup steps, you can begin adhering liquid wallpaper to the wall.

Manual method

1. The required amount of the composition is applied to the trowel;
2. liquid wallpaper is evenly distributed over the wall surface;
3. continue gluing layer by layer until the end of the work period.

You must squirt the desired area with a little water from a sprayer and go over it again so that the transitions at the joints of the wallpaper layers are not visible.

Gluing with a gun

Large-surface room wallpaper is typically applied with a gun to apply liquid wallpaper. However, you can also independently glue this kind of wallpaper at home with this tool. Smooth handling of the gun is required; a sudden change in coating consistency between wet and dry layers is not permitted. The consistency of the mixture for the gun should be similar to thick sour cream.

Please be aware that using a gun to glue material with large decorative elements—like glitter or colored thread—is not recommended. Sticking the composition by hand is preferable.

It is crucial to comprehend all of the necessary procedures, from surface preparation to application methods, in order to glue liquid wallpaper correctly. A meticulous attention to detail is necessary for this process, including making sure the wall is clean and smooth, preparing the wallpaper paste to the proper consistency, and applying the mixture evenly over the surface. Any room can look better with a smooth, appealing finish if you follow these easy but important steps.

The nuances of gluing liquid wallpaper

The issue of how to apply composition to difficult-to-reach surfaces in order to achieve an evenly distributed coating and prevent unevenness always comes up during repair and finishing. Applying the mixture in a thin layer and using side lighting are essential.

How to glue corners correctly

Applying liquid wallpaper to corners, doorways, and slopes is a very simple task. All you need to keep in mind is that the mixture must be applied in the proper direction, starting from the corner. Using a transparent trowel is the best method for applying wallpaper in corners.

We glue the doorway

Application tools and equipment remain the same around arches and doorways. Applying the adhesive mixture top to bottom is necessary; if there is any small excess, it needs to be removed. Apply the mixture from the bottom corner up, stopping about 20 cm from the floor. Divide equally. The mixture needs roughly two days to dry completely. Vigorous ventilation within the space can greatly expedite this procedure.

The easy process of applying liquid wallpaper can completely change the appearance of your walls. Anyone can accomplish a smooth, appealing finish with the correct planning and attention to detail. To ensure that the wallpaper adheres properly, start by making sure your walls are smooth, clean, and primed.

Pay close attention to the manufacturer’s instructions when mixing the wallpaper paste. The proper consistency will be ensured for simple application in this way. Using a trowel, evenly distribute the mixture across the wall, being careful to work slowly and methodically.

After wallpaper is applied, give it time to completely dry. This is an essential step in getting a long-lasting and robust finish. Recall that the best outcomes require careful application and patience.

Video on the topic

Subtleties of wallpapering. Sharing my experience.

How to glue liquid wallpaper

10 main mistakes with wallpaper. Advice for beginners and experts on how to glue wallpaper.

Master class. Bioplast liquid wallpaper

application of liquid wallpaper, external corner.

Liquid wallpaper how to apply to the wall. Even a beginner will cope!