"Shuba" decorative plaster is a flexible finish that gives surfaces both inside and outside more character and texture. Well-known for its rugged, distinctive look, it’s a popular option for wall finishers seeking something special and long-lasting.
There are several methods for applying "Shuba" plaster, whether you’re updating a facade or giving an interior area some flair. It’s critical to select the appropriate technique for your project because each one has a slightly different look and feel.
We’ll look at the different ways to apply "Shuba" plaster in this post and talk about how they work well for both interior and exterior applications. You can find the best method to get the desired textured finish using both contemporary machine applications and manual techniques.
- Composition of the mixture and its characteristics
- Where and what is it used for
- For the facade
- For interior decoration
- Preparing the walls
- Methods of applying the coating
- Brush and board
- Mesh
- Broom
- Video: creating the “Fur Fur” texture with a broom from sand-cement mortar
- Roller
- With a manual sprayer
- Gun with compressor
- Video: applying decorative plaster Fur coat with a spatula and trowel
- Painting
- Video on the topic
- Application of decorative plaster Shuba Facade
- Structural roller "Rough"
- Technique for applying decorative plaster with a roller
- Decorative plaster fur coat ilmax. Instructions for application
- 5 ways to decorate walls with PUTTY. Putty instead of decorative plaster
Composition of the mixture and its characteristics
You should research the composition and characteristics of the material before thinking about the primary techniques for applying the plaster coating.
Cement and fine sand stand out as two of the composition’s primary ingredients.
Manufacturers also add extra ingredients to the mixture’s composition, which changes its properties. The following lists the primary categories of solutions:
- Mineral plaster with the addition of cement, sand and lime has increased wear resistance. In addition, the coating prevents rotting and also protects against ultraviolet radiation.
- Acrylic mixtures are made using resins. Often, fillers with bactericidal properties are added to the mixtures to prevent the spread of mold and fungi.
- Silicone options are characterized by increased plasticity and strength.
The characteristics of the coating will vary based on the kind of solution that is used. The following should be noted as some of the primary features of decorative plaster with a fur coat effect:
- High wear resistance of the material allows it to be used in regions with sharp changes in temperature and humidity.
- Ease of application, creating a beautiful image.
- Thanks to the use of water-repellent components, the coating is easy to care for, just wipe the wall with a damp cloth.
- The modern composition allows you to paint the surface, which allows you to create a bright and expressive design of the building.
Where and what is it used for
For finishing and repair work, decorative plaster can be used underneath a fur coat.
When performing interior decoration of rooms, houses, restaurants, hotels, or office premises, it is frequently used to decorate the facade of a building.
Additionally, designers and decorators can use the version of the decorative coating that is being presented to create unique sculptures and to decorate balconies.
For the facade
The building’s facade could use an intriguing fur coat plaster design. The external walls of the house can be elegantly decorated with facade fur coat plaster, which also gives them a distinctive and expressive design.
You can obtain different properties from the coating when performing finishing works, depending on the application technique and technology.
A thinner layer should be applied to the facade if you wish to decorate it; a thicker layer is required for thermal insulation and noise reduction.
For interior decoration
Fur coats made of decorative plaster can be used to decorate interior spaces. It can be utilized in a variety of public spaces, including cafes, offices, and rooms. In addition to being highly wear resistant and easy to apply, the material makes the space feel cozy and comfortable.
Preparing the walls
It is important to properly prep the walls before designing a building’s interior or exterior. There are multiple steps involved in surface finishing:
- The work begins with removing the previous coating, for this purpose various tools can be used. It is necessary to completely get rid of the old coating on the walls.
- To create a smooth wall, it is necessary to treat the surface with a grinding disc or a brush with hard bristles.
- After this, it is worth carefully examining the walls. If mold or fungal colonies are detected, it is necessary to treat the wall with chlorine-containing substances, and then thoroughly wash the coating.
- All small cracks, scratches, chips and other defects should be repaired with cement mortar.
- After the cement has dried, a primer should be applied for better adhesion of the mortar to the wall.
Methods of applying the coating
You need to learn how to apply the mortar correctly if you want a unique look. There are several ways to complete tasks, and each has advantages and disadvantages. When performing repair and finishing work, it is important to take into account the different technologies available and select the most suitable application method. The most popular ways to complete the task are with a roller, broom, specialized sprinklers, or specialized equipment.
Brush and board
The most traditional way of working is with a brush and a board. The action algorithm is very straightforward when using this option:
- It is necessary to choose a brush with hard and elastic hairs, and also choose a dense small board.
- The brush should be placed in a pre-prepared solution, then turned over with the pile facing up and placed next to the wall.
- After this, a thick board should be used to move the brush towards you. So the mixture on the pile will be sprayed on the wall.
- The mixture should be sprayed evenly over the entire surface of the wall. This will create a uniform coating layer.
Selecting this option will result in a thin coat of fur being applied to the wall. However, because too thin a coating will remain on the wall, thermal insulation and noise reduction will not be achievable when using this method in the home.
Mesh
While finishing work is being done, a less common method is applying decorative fur coat plaster with a mesh. Here, the wall is covered with a small-cell chain-link mesh. Next, the entire wall’s surface should be covered with an even layer of the completed solution using a trowel. The mixture will leave the wall with an odd pattern after it goes through the mesh. The mesh is taken off the wall during the last step of applying the mixture. The coating will have the appearance of a fur coat because a solution will stay on the surface.
Broom
Broom use is another well-known technique. In this instance, a wooden block and a broom with thin rods are required to complete the task. When the job is done, the broom is dipped into a prepared mixture to coat the rods uniformly. Next, the block must be positioned parallel to the wall, and the broom must strike the stick. This movement will cause the mixture from the rods to fly onto the wall, creating a pattern that looks interesting and kind of like a fur coat. The labor intensity and duration of the work are the drawbacks of the method that is being presented. This is a technique that should only be applied to small surfaces.
Video: creating the “Fur Fur” texture with a broom from sand-cement mortar
Roller
Applying with a roller is a more straightforward and contemporary method. In this instance, a standard roller with any attachment is used to complete the task. After the material is poured into a unique rectangular container, a roller is used to roll it out evenly over the wall’s whole surface. With the roller, you can quickly apply a layer that is reasonably thick.
There is still another way to use a roller to complete the task. Apply the necessary amount of solution to the wall with a trowel, and then use a roller to evenly distribute the plaster across its surface. The motions are executed in an identical manner as when painting the walls.
With a manual sprayer
You can make decorating walls much easier by using this application technique. A specific amount of the mixture is put into the manual sprayer’s container. The mixture is then dispersed across the wall by turning the device’s handle. With this option, you can quickly apply an even layer of the mixture to the wall. The method that is being presented is ideal for completing large volumes of work and performing repairs.
Gun with compressor
Professionals typically use mechanical options to apply the mixture on large surfaces. A pressure pump, nozzle, and solution container make up the compressor-powered gun device. A uniform layer of plaster is formed on the wall by spraying the mixture from the container under high pressure.
The following is the general idea behind plaster application with a gun:
- The gun is placed at a distance of 25-30 centimeters from the wall.
- After this, the solution is distributed in an even layer from top to bottom.
- The applied solution forms a pattern in the form of a fur coat.
- After completing the work, it remains to wait for the mixture to dry completely.
You can finish a lot of work quickly with a gun and compressor, but professional equipment costs a lot of money.
Video: applying decorative plaster Fur coat with a spatula and trowel
Decorative plaster Shuba’s textured finish adds character and durability, making it a versatile way to improve surfaces both inside and outside. Depending on the surface and intended effect, different application techniques are used to achieve a rustic or modern look. Shuba offers exceptional weather resistance for outdoor work, and it creates a warm and distinctive atmosphere indoors. Gaining proficiency in the application of this plaster makes it an excellent option for a variety of building and remodeling projects since it guarantees a durable and aesthetically pleasing finish.
Painting
Painting can be used to decorate the building’s facade or add variety to the interior. There are a few methods available for altering the coating’s color, including:
- Adding color to the finished solution. The presented option is suitable for a small surface. For a large volume of work, you will need to prepare several buckets of the mixture, and it will be difficult to create the same shade.
- Applying paint over the mixture is a more convenient option. To do this, just wait 2-3 days after completing the work, and then apply an even layer of paint using a roller. When performing work, it is better to use water-repellent compounds, this will allow you to take care of the coating in the future.
Method | Description |
Manual Application | In this method, the plaster is applied using a trowel or brush. It"s commonly used for smaller areas or detailed work, allowing for better control of texture. |
Machine Application | This method uses a special sprayer to apply the plaster. It"s faster and more efficient, ideal for covering large surfaces, especially in external works. |
Roller Application | A textured roller is used to apply the plaster. This method is simple and effective for creating a uniform texture on internal walls. |
Brush Application | Using a stiff brush, the plaster is spread to achieve a rough texture. It"s often used in decorative external finishes. |
Decorative plaster Shuba is an adaptable choice that gives walls, both inside and out, texture and personality. The various application techniques enable you to be creative and flexible in meeting your needs, whether you’re trying to improve the outside of your house or give your interior spaces a distinctive finish.
There are several advantages to applying Shuba in different ways, whether you choose to use traditional methods or contemporary ones. You can achieve a long-lasting, professional-looking result with careful planning and the appropriate equipment.
Recall that meticulously following the instructions and selecting the appropriate technique for the given environment are the keys to a successful application. This guarantees your walls long-lasting protection in addition to a gorgeous finish.