Plaster with marble chips: application technologies and photos in the interior

A common option for giving interior walls a hint of refinement and luxury is plaster mixed with marble chips. This special finish creates a surface that is both elegant and long-lasting by fusing the strength of plaster with the inherent beauty of marble. This kind of plaster can improve any room’s aesthetics, whether you’re going for a more modern or classic look.

Applying marble chips to plaster has two purposes: it creates a surface that is robust and long-lasting. To get the right texture and finish, the marble chips and plaster are carefully combined and applied in layers. The finished product is a surface that is perfect for both residential and commercial spaces because it is both aesthetically pleasing and resilient to wear and tear.

This post will discuss the different methods for applying plaster with marble chips and provide step-by-step instructions for those who would like to give it a try. Inspiring images of rooms that have been changed by this opulent finish will also be displayed, giving you ideas and motivation for your own projects.

Types of marble plaster

The following categories of material exist today:

• with the addition of granulated marble chips;
• with marble flour.

The following types are differentiated based on chip size:

• from 0.2 to 1 mm;
• from 1 to 3 mm;
• from 3 to 5 mm.

If the kind of binders serves as the foundation for categorization:

• gypsum;
• lime;
• cement-sand;
• acrylic.

• in the form of a solution. You can start working almost immediately;
• dry. They will need to be pre-diluted with water.

They can be used for finishing exterior surfaces like facades as well as interior work.

Features of the material

The composition of this kind of building material may differ. Its characteristics are determined by the parts that make it up. Marble flour or crumbs form the base. A fine fraction of granite is frequently added by manufacturers to increase strength and lower the cost of this material.

With the aid of acrylic resins or mineral additives, they are blended into a single mass. To fight pathogenic bacteria, fungi, and mold, special compounds can be added. For beauty, natural mother-of-pearl is frequently added.

Advantages and disadvantages

Marble plasters provide a number of benefits.

• suitable for finishing work not only inside the house, but also for exterior finishing of facades and other surfaces;
• long useful life;
• color is not limited to the natural palette of marble;
• successfully resists mechanical stress;
• breathes;
• not afraid of moisture, temperature swings and ultraviolet radiation;
• effectively protects surfaces from mold and mildew;
• absolutely safe from an environmental point of view;
• Working with this type of plaster is comfortable.

• over time, the original color saturation of the coating loses;
• may collapse upon contact with a number of chemically aggressive substances (hydrochloric acid, etc.).n.);
• pleasure is not cheap.

Cooking proportions

On the back of the package, every manufacturer provides the ratios and formula for making plaster mortar; these are frequently provided step-by-step. Although you can attempt to make it yourself, if you want a result that is guaranteed, it is preferable to use a factory mixture.

Approximate consumption

A layer of one to three millimeters is applied to structural plasters composed of marble chips. Everything in this case is dependent upon the desired level of texture depth. For every square meter of surface, one kilogram of plaster mix will be needed if you intend to apply the material once, up to a height of one millimeter. One layer of wall covering 10 square meters will require a 25 kg bag of mixture. It is preferable to purchase two bags in advance if you intend to apply in two to obtain a thicker coating.

Technology of applying plaster with marble chips

By breaking down the entire complex of works into discrete stages, the application technology produces a plaster layer that is both durable and of excellent quality. Experts advise against going against their recommendations and order. In this instance, the finish won’t be durable enough to endure for the full service life. Its visual appeal could also be severely compromised.

Required tools

The following equipment is required to apply plaster to the surface that has been chosen for finishing:

• a suitable container to prepare the plaster solution;
• a mixer or electric drill with a special nozzle for mixing;
• a ruler;
• a grater made of stainless steel;
• a flat brush;
• metal trowel;
• masking tape;
• cotton gloves;
• ruler;
• plumb line;
• building level;
• grout.

Wall preparation

You must skillfully complete all required preparatory work in order to get a dependable and high-quality plaster layer:

• high-quality remove the old coating from the walls;
• all protruding elements on the surface are dismantled;
• it is better to level the unevenness of the surface with putty;
• check the obtained result with plumb lines and a building level;
• after the rough layer has dried, apply a primer in 2 layers with an interval of 3 to 4 hours.

If the surfaces are excessively uneven, plasterboard pre-leveling is advised. Putty needs to be used to seal the joints. The surfaces are then primed after that. Minor flaws will be concealed by structural marble plaster without the need for further correction.

Manual application

Plaster composition preparation is a prerequisite for high-quality manual plastering. Diluting the thick mixture with a solvent or regular water is a simple process. The manufacturer’s markings on the exterior of the Tara indicate the proportions.

• mix the dry plaster, adding the amount of liquid specified in the instructions. If it is not liquid enough, then dilute until the desired consistency is obtained;
• take a little solution on the trowel. Please note that it should be held strictly at an angle of 60 degrees;
• the mixture should be applied to the surface to be treated only in one direction and with a little force for adhesion to the base;
• wait about half an hour for the layer to dry;
• if necessary, apply 2 and 3;
• as soon as the plaster layer begins to set, it is necessary to rub it with a trowel. Then use a float in a circular motion, make sure that the pressure is uniform;
• wait until the plaster is completely dry;
• take acrylic varnish, wax or other water repellent and do the treatment.

Mechanized application method

The time and effort required by the manual method is excessive. As a result, they frequently turn to applying marble plaster using a machine. A pneumatic crumbler or another tool with the necessary features is required.

• Scoop up the marble plaster solution into a working container and pump air into the compressor. Apply a layer of the mixture to the surface prepared for finishing. The working pressure should be stable and amount to 6-7 atmospheres. Sharp or jerky movements when moving the bucket down from above are unacceptable.
• The distance to the surface should be 250-450 mm. It is important to control the uniformity of the mixture application.
• After a 30-minute pause, the surface must be rubbed down. You will need a metal trowel. After the surface has completely dried, it must be treated with a protective compound.

Creating a pattern

Take two colors of marble plaster if you need to create a pattern, like in bright photos from the Internet. Masking tape is required to prevent destroying the figured insert, stripes, ornament, or pattern. The image that you want to transfer to the plaster layer needs to be ready.

Tools for creativity:

• ruler;
• scotch tape;
• building level;
• pencil or felt-tip pen for marking.

Using the template as a guide, the contours of the final image are first applied to the surface. Noted is the plaster composition application order. Masking tape is glued along the contour of those from which you plan to start applying. After that, the desired shade of plaster is applied; take care not to climb over the tape. Then, while the applied layer dries, carefully remove it and begin working on another area of the surface.

Finish coating

It is best to apply additional protection to the plaster layer once it has fully dried. For instance, you can coat the layer with varnish, but only after it has had a full day to dry.

To bring out the beauty of the texture, you will need to paint the surface after pre-sanding it.

Next, apply varnish (ideally water-based) and allow it to fully dry. This type of varnish spreads more evenly across the plastered wall’s surface and dries quickly. Taking into consideration the particulars of the operation, the same paints are used for both exterior and interior work.

Wax can also highlight the texture and revive faded paint. Additionally, it will guard against dirt, dust, and mechanical harm.

Plaster with marble chips offers a long-lasting and striking finish, bringing a touch of luxury and elegance to any area. Whether you’re going for a modern or classic look, this post will walk you through the simple application process, offering helpful advice and inspiring images of how this gorgeous material can change interiors.

Video on how to apply decorative marble plaster

DIY marble plaster

If you are the type of person who prefers to handle everything on your own, experts advise using the following advice as a guide. Consider:

• 1.89 liters of marble chips and dust;
• 1.89 liters – slaked lime for interiors, white decorative plaster (a set of colors is included) or sand-cement mixture will do;
• about 30 g of soap or degreasing dishwashing detergent;
• 350 ml – linseed oil. It acts as a plasticizer.
• 180 ml – water.
• Dye

It is preferable to use acrylic resins in their place if at all possible. The composition of the plaster will be more malleable.

Work the mixture into the consistency of cake dough by adding water or solvent as needed. Paint pigments should be added.

When applied initially in a single layer, the homemade composition is very cost-effective, requiring only 200–300 g per square meter of surface. More plaster composition will be needed for the upcoming ones.

Aspect	Description
Surface Preparation	Ensure the surface is clean, dry, and free from dust and grease. Apply a primer to enhance adhesion.
Mixing the Plaster	Combine the marble chips with plaster according to the manufacturer"s instructions until you get a smooth consistency.
Application Process	Use a trowel to spread the mixture evenly on the wall, ensuring consistent thickness.
Finishing Touches	After the plaster has slightly set, use a float to smooth the surface and reveal the marble chips.
Drying Time	Allow the plaster to dry completely, which can take several days depending on humidity and thickness.
Interior Photos	Plaster with marble chips adds elegance and texture to interiors, ideal for feature walls or entire rooms.

Plaster mixed with marble chips is a visually attractive and adaptable choice for finishing interior walls. Any room can be made to seem more elegant and sophisticated with its distinctive texture and inherent shimmer. This kind of plaster can fit into any style, whether it’s traditional or modern, which makes it a popular option for both designers and homeowners.

With the appropriate tools and techniques, the application process is simple but still requires some care and precision. It’s critical to adhere to the suggested procedures in order to guarantee a strong and seamless finish. A magnificent visual effect that lasts for years can be achieved with careful application, proper plaster mixing, and surface preparation.

The practical benefits of plaster with marble chips extend beyond its aesthetic appeal. It is appropriate for many areas, including bathrooms and kitchens, because it is strong, moisture-resistant, and low maintenance. It’s simple to alter the style to suit your preferences and the particular requirements of your room thanks to the variety of colors and finishes that are available.

In general, investing in plaster with marble chips is a smart choice in terms of both appearance and utility. It offers durable wall protection along with a classic appearance that accentuates the beauty of your interior. This kind of plaster is a great option to think about, whether you’re remodeling the entire space or just adding an accent wall.

Video on the topic

Marble chips on the kitchen wall.

applying marble plaster to the wall.#KOTOFET

Marble Effect in 10 Minutes | Decorative Plaster Brilliantly Simple

How to properly apply "Marble Plaster"