Pneumatic bucket for plastering walls

Plastering is a physically and time-consuming task, as anyone who has undertaken one will attest. The pneumatic bucket is useful in this situation. With the aid of this tool, plastering walls will be quicker and simpler, resulting in a smoother, more uniform finish with less work.

The pneumatic bucket provides a workable solution to one of the most challenging aspects of wall finishing, regardless of your level of experience or interest in do-it-yourself projects. It guarantees consistent results, minimizes fatigue, and expedites the application process.

This post will explain the features, functions, and potential applications of the pneumatic bucket for your upcoming plastering project.

Positive properties of a pneumatic bucket.

Because the plaster droplets are smaller and more adhere to the base, all uneven areas are filled. Plaster is sprayed at a rapid pace; a master can plaster one square meter or more in one minute. The resulting pattern, called "pimples," can be left as is (the external effect is actually a full-fledged effect of the "Fur Coat" plaster) or it can be embossed to resemble brick, stone, or block masonry. Would you kindly request an alternative pattern? You can draw whatever you want until the plaster hardens.

Advice: When distinct sections are painted in different colors, the contrast between a "fur coat" and a smooth surface appears particularly unique and striking. Use just three shades at most!

An additional benefit of a pneumatic bucket is:

Factory bucket: features, application.

Plaster application buckets can be manufactured in factories or made at home. The latter come in wall and ceiling versions. The handle on the wall bucket is bent at a 45-degree angle, whereas the handle on the ceiling bucket is bent at a right angle.

These are multipurpose instruments fit for a range of tasks, such as:

• Application of liquid wallpaper;
• Painting with textured paints;
• Plastering with cork, cement-sand compositions;
• Application of concrete mortars.

Using a hopper, or pneumatic plaster scoop, ensures superior adherence and offers quick, high-quality plaster application to both horizontal and vertical surfaces. Because the solution is supplied under high pressure, it sticks to the wall or ceiling very well. It takes 4-5 seconds to produce an entire scoop of plaster. This level of productivity is made possible by the compressed air-supplied nozzles at the tool’s base.

A useful tool that greatly expedites and streamlines the plastering process and makes it simpler to achieve a smooth, even finish is a pneumatic bucket for plastering walls. This tool, which is great for do-it-yourselfers and pros alike, uses compressed air to evenly apply plaster to walls, saving labor and increasing productivity. Whether you’re working on a big project or just want to plaster more quickly and effectively, knowing how to use a pneumatic bucket will help you get professional results in less time.

How to make a pneumatic scoop yourself?

The obvious benefit of using a homemade plaster application scoop instead of a factory one is that it will be less expensive to make. The mechanized method of plaster application is more productive than the manual method.

The bucket is a container with a top that is partially closed, a bottom, and four walls. An inexpensive, DIY pneumatic plaster bucket can be created by cutting off the top of an old 5-liter canister or by using a sheet of iron (stainless steel works well). The front wall, which is angled, must be made of metal. You can equally effectively apply the mixture to the ceiling and walls thanks to the partially closed top and inclined wall.

Crucial! Because it is lighter than cement plaster, gypsum plaster, such as "Rotband," is preferable for surfaces that are reversely horizontal (ceilings).

Note the dimensions: the nozzle has a diameter of 5 mm, and there are 16–20 mm between it and the bucket’s front wall. Create a front hole that is 10 to 12 mm in diameter. For the connection, use pull-out rivets made of aluminum or steel. Two pieces of duralumin are also used to secure the gun to the rear wall. The heavy nature of the solution and the aluminum construction of the sprayer necessitate this action. A 45-degree angle connects the handle to the pneumatic bucket on the left (or right, for left-handed people).

The handle is an assembled pistol made to fit a variety of pneumatic tools. It is available at specialty stores. When plastering a wall with a pneumatic tool, the same gun serves as a valve to control the air supply. The gun’s front section is installed in a hole drilled in the bucket.

How to use a plastering ladle?

Once the ladle is filled with the finished mixture, air is pumped into it at a pressure of six atm, flowing from the hose into the hopper. The next step is to modify the air mass supply to the nozzles. That’s it; the sprayer is now prepared for use.

Pneumatic application of plaster on the wall.

It’s important to pay attention to consistency; the mixture should not release moisture when squeezed in your hand.

When the composition is more rigid than for manual application, it works best. You can work with soft plaster as well, but eventually it will flow out of the bucket, making it harder to level, and then it will start to crack.

Use a hose to connect the compressor and the gun. Set the air supply to two to three atm. Grip the tool’s handle with your right hand and the container’s handle with your left (or, if you’re left-handed, the opposite). Using the plaster bucket as a scoop, gather the solution. Press the trigger, fill the space between the beacons, and move the gun from top to bottom until the entire gap is plastered. Hold the compressor 15-20 cm from the wall. Grab a lengthy board or a rule, and trim the extra. One layer of plaster will suffice.

You can adjust the nozzle’s diameter, the mixture’s density, the diameter of the hole in the pneumatic bucket’s front wall, and the plaster’s application distance to the surface to get the desired size of "pimples." You’ll become proficient with the plastering bucket after some trial and error.

Note: recommendations for working with a bucket.

Apply plaster to areas that are difficult to reach by using specialized attachments.

Cleaning the pneumatic bucket from plaster.

After plastering everything you had intended to, remove any leftover mixture from the pneumatic bucket and clean it right away. It will be challenging to get rid of the lumps if they have time to dry. Lower the tool into a water container as a last resort. After the plaster gets wet, it will peel off the bucket’s walls.

Whether you use a pneumatic plastering bucket that you make yourself or a tool that you purchase, neglecting to clean it will cause the nozzles to clog and eventually malfunction the next time you use it.

The use of a pneumatic bucket can revolutionize the plastering process for all those involved. Its rapid and even application of plaster saves time and effort, improving the efficiency of the entire process. The quality of your work can be greatly enhanced by this tool, regardless of whether you’re a professional or a do-it-yourself enthusiast.

The advantages it offers in terms of speed and finish make up for the seemingly high initial cost. Less time will be spent preparing and applying plaster, and the reliable outcomes will be self-evident.

Ultimately, a pneumatic bucket is a useful addition to your toolkit if you’re looking to achieve a smooth, professional finish with the least amount of effort. It’s a workable solution that makes plastering easier and frees you up to concentrate on finishing the job correctly.

Video on the topic

What is a hopper bucket? And why is it the best assistant for a plasterer?

Gypsum Plastering of walls using a Hopper bucket.

Plaster pneumatic bucket at work .

PNEUMATIC GUN FOR APPLYING DECORATIVE PLASTER (FUR COAT) !

Hopper plastering bucket (plastering shovel) (pneumatic bucket)

hopper bucket

Pneumatic bucket for plastering walls PK-1.1

Plastering gun (hopper bucket)